Full custom production

Cut and Sew Manufacturing

From your sketch, reference sample, or tech pack — we handle pattern making, sampling, and bulk production in one plant.

  • Sketch to bulk in one plant
  • In-house pattern room
  • PPS sealed before cutting
  • Print, embroidery, and wash
Machinists producing custom garments at the Toohoo Custom workshop in Quanzhou
7–14 days Sampling turnaround
30개 Minimum per colour
100,000 pcs Monthly capacity
7–21 days Bulk lead time
Starting points

You bring what you have. We build from there.

Most brands arrive with less than they think they need. Here is what each starting point can actually become.

What you haveWhat we can take it toWhat we need from you
Photos, moodboard, or a competitor linkA direction proposal: silhouette, fabric weight, wash, and trimFabric feel and budget range
A sketch or AI renderEngineered pattern, measurement chart, and construction sheetKey body measurements
One reference garmentReverse-engineered pattern and a 1:1 sampleWhether the fit should change
A complete tech packStraight to sampling — the fastest routeMeasurement tolerances
Only have pictures? That is enough to start — but be clear about what you get. From photos and moodboards we can propose a direction: silhouette, fabric weight, wash, and trim. We cannot reverse-engineer a garment from an image. To match a specific product, send a reference sample or a measured spec — otherwise expect a close interpretation, not a replica.
Capabilities

What we build

Core streetwear and casual categories, produced in-house from pattern to packing.

Fabrics

  • 180–600 GSM cotton and blends
  • French terry and fleece
  • Rigid and stretch denim
  • Technical knits
  • Custom-knitted fabric from 300 pcs

기술

  • Screen print and DTG
  • Puff print and chenille
  • Flat and 3D embroidery
  • Acid wash and garment dye
  • Distressing and laser etching
Development process

How a project runs

Eight steps from brief to shipment. Each one lists what we do, how long it takes, and what we need from you.

  1. 01
    Brief and feasibility
    We review your material, tell you what is buildable, and quote the development fee before sampling starts.
    1–2 days
    Target style and budget
  2. 02
    Fabric and trim sourcing
    Fabric options, trims, and swatches sent for approval.
    3–7 days
    Approve hand feel
  3. 03
    Pattern making and grading
    Pattern built from your reference, then graded across the size run.
    2–3 days
    Key measurements
  4. 04
    First sample
    One garment made to the approved pattern and trims.
    3–4 days
    Receive and try on
  5. 05
    Sample review and revision
    Fit corrections, detail adjustments. Repeat rounds as needed.
    2–4 days / round
    Written feedback
  6. 06
    PPS approval
    Pre-production sample signed off and sealed as the bulk reference.
    1–2 days
    Sign off
  7. 07
    Bulk production
    Fabric inspection, cutting, sewing, finishing.
    7–21 days
    —
  8. 08
    Inspection and packing
    Final check against the sealed sample, then packing and dispatch.
    2–3 days
    Confirm packing
Size control

Every style ships against a measured spec

A size chart is not a guess. Each style gets a measurement sheet before bulk starts — measured at fixed points, with tolerances your buyer can check against the parcel.

Pattern drafting drawings showing front and back panels of two custom dress blocks
Pattern marker being traced onto fabric with tailor's chalk before cutting
Measurement points
Chest, body length, sleeve, shoulderDefined per style on the approved sample, not copied from a stock chart
Tolerance
±1.5 cm on width, ±2 cm on lengthPublished before cutting so bulk can be judged against a number, not an impression
Size run
XS–XXXLGraded from the fit sample; custom grading available on request
Sample control

How we keep samples from drifting

A good sample that produces a different bulk order is the most common failure in custom production. Three checkpoints prevent it.

Round 01

Proto sample

First garment off the new pattern. Proves the silhouette and overall proportions.

Round 02

Fit sample

Corrected pattern after wear test. Fixes measurements and construction details.

Round 03

PPS and sealed sample

Pre-production sample, signed and sealed. Bulk goods are measured against this one garment.

Every round is measured point by point against the measurement chart — not judged by eye.
Colour, fabric batch, and print placement are locked at PPS and do not change in bulk.
One sealed sample stays with us. Final inspection compares against it, not against memory.
Order terms

Production terms

Published so you can judge feasibility before you write to us.

Minimum order — stock fabric
30 pcs per colourMixed sizes within the colour count towards the same 30
Minimum order — custom-knitted fabric
300 pcsKnitting a fabric to your own specification
Pattern and sample development
Quoted per design
Depends on construction and how much pattern work is new. Send your design and we will price it before sampling starts.
Sampling lead time
7–14 days7 days on express sampling, counted from approved fabric and trims
Bulk lead time
7–21 daysAfter PPS approval; the range reflects quantity and finishing
Payment
50% deposit, 50% before shipment
Peak season
Book 4 weeks aheadFor Q3 and Q4 delivery
Quality gates

Four points where defects get stopped

Inspection is scheduled at fixed points. Each one has a defined reject action.

Point 01
Fabric inspection
Colour consistency, defects, and weight checked on receipt. Rejected rolls go back to the mill.
Point 02
Cut panel check
Panel measurements, grain direction, and layer count verified. Misaligned panels are recut.
Point 03
First-piece approval
First garment compared against the sealed sample. Line stops and resets if it differs.
Point 04
Final inspection
AQL 2.5 sampling before packing. Failed lots are reworked or remade.
Client feedback

What clients say

Six reviews from brand owners, each with the photo they uploaded themselves.

Client photo of a custom printed white t-shirt

“my shirts came in exactly as I ordered ! followed the mockup I sent over to perfection. I couldn’t be happier with the results”

US · Jun 2026 Alibaba.com
Client photo of an acid wash t-shirt with large graphic print

“they created my design exactly how I asked and made it even better with a very affordable price.”

US · Apr 2026 Alibaba.com
Client wearing a custom two-tone hoodie

“The product matches the requested measurements. I’ve been wearing the hoodie every day for over a week because it’s very comfortable.”

RO · Sep 2025 Alibaba.com
Client photo of three black graphic t-shirts

“The product quality is truly impressive, and the company is also very professional. The technical specifications were met. I recommend them without hesitation.”

FR · May 2026 Alibaba.com
Client photo of packed custom beanies ready for shipping

“Super happy with my bulk order. The pieces came in nicely packaged and the quality turned out solid, Communication was smooth from start to finish, and they were very helpful during production.”

CA · Feb 2026 Alibaba.com
Back view of a custom printed black t-shirt delivered to a client brand

“I am thrilled with the exceptional quality and craftsmanship of the 'We All Shine' Boxy Crop Shirts produced by this amazing company. Check out the final product on our Instagram: @Emcbrand14”

US · May 2024 Alibaba.com
Toohoo Custom

준비 완료 Sparkle 귀사의 브랜드?

디자인을 보내주시면 맞춤 견적을 받으실 수 있습니다.

  • 12시간 이내 회신
  • 최소 주문 수량 30개

문의 보내기!

귀하의 필요 사항을 설명해 주세요. 함께 이야기해 보겠습니다!
전화번호: + 86 15060815861
Email:dylan@toohoocustom.com
6층, A구역, 1139호, 남링로, 치투 커뮤니티, 진룽 거리, 춘저우, 후베이